产品简介
The Sentry POPS/PIPS CDU combines all of the features of a Switched CDU with the ability to provide power monitoring per inlet/infeed. Power information per infeed includes current, voltage, power, apparent power, crest factor, reactance, power factor and accumulated energy. This information replaces branch circuit monitoring devices typically installed in the power distribution panel or remote power panel (RPP) with higher accuracy and lower cost monitoring of each circuit attached to the CDU.
In addition to inlet monitoring this Cabinet Distribution Unit provides network and serial-based power management and alerting capabilities for each outlet with the ability to monitor:
Current Load (A)
Voltage (V)
Power (W)
Apparent Power(VA)
Crest Factor and
Power Factor
Utilizing our grouping feature, power information is available per device (multiple outlets), groups of devices (applications), individual Cabinet PDU, cabinet, rows of cabinets or the whole Data Center Floor. Combine the Sentry POPS Smart Cabinet CDU with the Sentry Power Manager (SPM) software tool to cluster outlets and gain power usage information across multiple Cabinet PDU's individual IP address.
The Sentry Power Manager (SPM) provides power distribution unit power (kW and kW-h) monitoring and environmental monitoring across all Sentry CDU's within the network. Reboot a single or dual-power supply server with one command. Receive email alerts when power or environmental conditions exceed thresholds. Assign users specific access rights to designated outlets or groups. Only the Sentry Power Manager is capable of regulating all Sentry Cabinet PDU's across the network while providing power readings and management at an outlet level.
产品特点
| Sentry Cabinet PDU Specifications |
| Item # | Available Input
Voltages | Rated
Amperage | Available Input Cord | Outlets | Dimensions
(L x W x D) |
| CWG-30VD/VY (30xC13)-3Ph |
CWG-30VDD458
CXG-30VDD458* | 240V 3-Phase Delta, 50/60Hz | 20 A | NEMA L15-20P Cord Set, 10 ft (3m) | (30) IEC 60320/C13
| 73.5 x 1.75 x 3.50 in
(1867 x 44 x 89 mm) |
CWG-30VDE458
CXG-30VDE458* | 240V 3-Phase Delta, 50/60Hz | 30 A | NEMA L15-30P Cord Set, 10 ft (3m) | (30) IEC 60320/C13
| 73.5 x 1.75 x 3.50 in
(1867 x 44 x 89 mm) |
CWG-30VYL458
CXG-30VYL458* | 208V 3-Phase Wye, 50/60Hz | 20 A | NEMA L21-20P Cord Set, 10 ft (3m) | (30) IEC 60320/C13
| 73.5 x 1.75 x 3.50 in
(1867 x 44 x 89 mm) |
CWG-30VYM458
CXG-30VYM458* | 208V 3-Phase Wye, 50/60Hz | 30 A | NEMA L21-30P Cord Set, 10 ft (3m) | (30) IEC 60320/C13
| 73.5 x 1.75 x 3.50 in
(1867 x 44 x 89 mm) |
| * CXG refers to the Expansion Module |
| Additional Features and Specifications |
Standards
> US & Canada (cTUVus mark) to UL 60950-1:2003 and CAN/CSA 22.2 No. 60950-1-03
> TUVGS - EN 60950-1:2001
> FCC Class A, Part 15
> CE Mark
> EMC-EN 55022 Class A, EN 55024 CISPR 22 Class A
Communications
> 10/100 BaseT Ethernet
> HTTP/HTTPS
> SSLv3/TLSv1
> SNMPv2
> SSHv2
> Telnet
> LDAPv3/LDAPS
> TACACS+
> RADIUS
> RS-232 (Serial)
Branch Circuit Protection
> Compliant to UL 60950-1
Accessories
> Temperature & Humidity Probe
- EMTH-1-1 Temperature & Humidity Probe, 10 ft (3 m)
- EMCU-1-1B add 2 additional Temperature & Humidity ports, 4 contact-closure monitoring ports and
1 water sensor port
Remote Power Monitoring
- Monitor input power via IP or serial interface. |
