冠林数据系统(北京)有限公司 Guanlin Data Systems (BJ) Ltd
产品搜索
产品导航
ICRON-产品导航
 
RFCode-产品导航
 
IHSE-产品导航
 
Servertech PDU-产品导航
 
Upsite-产品导航
 
QDS-产品导航
 
NTI-产品导航
 
Avocent
 
Smart-AVI产品导航
 
OPHIT
 
Simplex-产品导航
 
KVMTEC
 
Lantronix
 
产品品牌
Avocent
EDP Label
Humanscale
ICRON
IHSE
NetComstation
NTI
QDS
PlenaFrom
RFCode
ServerTech
Simplex
SceneDouble
Koldlok / Hotlok
Verity Sytems
在线客服
 工作时间
周一至周五 :8:30-17:30
产品详情
PT45-H808-2-07
类型: Sentry Commander PT45
品牌: Server Technology
型号: PT45-H808-2-07
产品详情

产品简介

The Sentry Commander PT45 uniquely combines Remote Power Management and Pass-Thru Console Port AccessTM into one enclosure and - distinctively - one interface.   With this exclusive combination of features, a network manager can perform a remote server reboot or establish serial communications with a remote device.

Remote Power Management allows the user to perform a remote server reboot or to bounce the power to another network device. A network manager can power off, power on and reboot network devices from any location via SSL Web, SSH, SNMP, RS-232 or secure out-of-band session.  

Pass-Thru Port Access integrates secure, in-band and/or out-of-band serial connections to the console ports of up to 4 inter-networking devices for remote problem determination.  The serial console is the only universal out-of-band management media for all the equipment in the data center.  It has the ability to access servers for remote monitoring and communications for applications such as BIOS configuration, boot-prompt level access or remote configuration.  Otherwise, connect to the configuration port (console or auxiliary port) on network equipment such as routers, switches, hubs and access servers.  

The PT45 operates distributed Inline Power Modules (IPM's), which provide four distinct functional advantages:

1.Independent Power: One-to-one ratio between power input, IPM & device eliminates single point-of failure.

2.Greater distance:  each IPM can be up to 1000' from the PT45 Commander.

3.Mixed-Amperage: 10-Amp and 20-Amp IPMs to control both severs & network gear.

4.Mixed Voltage: 110 VAC and 230 VAC IPMs can be controlled from one PT45.

产品特点

Sentry  Cabinet PDU Specifications
Item #Available Input
Voltages

Rated

Amperage

Available Input CordOutlets/
Outputs
Dimensions
(L x H x D)
Sentry Commander PT45
PT45-H808-1-07*100-120V
50/60Hz
20AIEC 60320/C14
Power Inlet
(8) IPM ports for Remote Power
(8) RJ12 Pass-thru Console Ports
17.2"x1.75"x 8"
(437x44.4x203.2mm)
PT45-H808-2-07*208-240V
60Hz
20AIEC 60320/C14
Power Inlet
(8) IPM ports for Remote Power
(8) RJ12 Pass-thru Console Ports
17.2"x1.75"x 8"
(437x44.4x203.2mm)
PT45-H016-1-07*100-120V
50/60Hz
20AIEC 60320/C14
Power Inlet
(16) IPM ports for Remote Power17.2"x1.75"x 8"
(437x44.4x203.2mm)
PT45-H016-2-07*208-240V
60Hz
20AIEC 60320/C14
Power Inlet
(16) IPM ports for Remote Power17.2"x1.75"x 8"
(437x44.4x203.2mm)
Options
*Option C-HPTGlobal Secure Modem 56K bps


IPM3-R-3
IPM5-R-2
PM20-0-1
PM20-0-2

Sentry Power Module, In-Line w/ Retainer Clip, Always-on, includes 6' RJ Signal Cable, UL & CSA Approved
10-Amp, 100-120 VAC, 50/60Hz
6-Amp, 208-240 VAC, 50/60Hz
16-Amp, 100-120 VAC, 50/60Hz
16-Amp, 208-240 VAC, 50/60Hz

CAB-1413RJ12-to-RJ45 Sentry to Cisco/Sun data cable
CAB-1414RJ12-to-RJ45 Sentry to Cabletron data cable
KIT-0002DB25 M adapter and RJ12-to-RJ12 Straight thru modular data cable
EMCU-1-1Environmental Monitoring unit w/ 1 Temp & Humid. Probe
EMTH-1-1Temperature & Humidity Probe, 10?
Additional Features and Specifications
Standards
> cTUVus ? UL 60950-1-2003
> CAN/CSA 22.2 No. 60950-1:2003
> TUVGS ? EN 60950-1:2001
> FCC Class A, Part 15

Communications
> 10/100 BaseT Ethernet
> SSLv3/TLSv1
> SSHv2
> LDAPv3/LDAPS
> Half-duplex/Full duplex
> RS-232 (Serial)

Communications Interface
> Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600
> Pass-Thru Console Ports must be set at the same speed as the Sentry

Standard Adapter Kit
(1) RJ12-to DB9 Female
(1) RJ12-to DB9 Male
(1) RJ12-to DB25 Female
(1) RJ12-to DB25 Male
(4) RJ12-to RJ12 (6P6C) Crossover/ Rolled Data Cables (7')

User Interface
> Command Line Interface & HTML GUI for power management and configuration
> Telnet/ANSI/VT 100 Terminal Emulation for command-line and Pass-Thru
Pass-Thru Console Port
6-pin RJ12
1= Signal Ground
2=Device Ready-In/DSR
3=Data-In/RD


4=Data-Out/TD
5=Device Ready-Out/DTR
6=Signal Ground