冠林数据系统（北京）有限公司       Guanlin Data Systems (BJ) Ltd

产品简介

The XTENDEX® HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 333 feet away over a Second-Generation (2G) 1000BASE-T Gigabit Network connected with CAT5e/6/7 cable.

Each HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

产品特点

The XTENDEX® HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 333 feet away over a Second-Generation (2G) 1000BASE-T Gigabit Network connected with CAT5e/6/7 cable.

Each HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display.  The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

• Supports HDTV resolutions to 1080p.

• Ideal solution for digital signage applications.

• Optional Transmitter and/or Receiver with Power over Ethernet (PoE) - power supply not required at the local and/or remote unit.

• Broadcast real-time HDMI video/audio to multiple display locations.

• Transmits an HDMI signal over one CAT5e/6/7 cable.

• Supports video wall installations from 1x2 to 8x8 screens.

• Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for Managed network switch.)

• Easily expandable. Add remote units as you add monitors.

• No image scaling, the original video signal that is input will be output at the source resolution.

• Supports 2-way RS232 commands (control software on a PC, or other automated control system hardware such as Control4 or Crestron) to control any devices attached to the matrix using RS232.

• Integrated mounting wings for ease of installation.

• Inexpensive CAT5e/6/7 cable replaces bulky video cables.

• Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support one transmitter.

  • Each VLAN acts as a separate HDMI Over IP Channel on the network.

  • One transmitter can connect up to 200 receivers using cascaded managed network switches.

  • Cascade managed switches up to 3 levels, allowing the farthest display to be located up to 1,000 feet away from the source device. Each receiver can be located up to 333 feet from the managed switch.

  
  

• If a non-managed network switch is used for a point-to-many connection, it is not recommended to use other network devices on the same switch as it may cause a degradation in performance.

• Use a PC to access the built-in HTTP Interface of the managed network switch to control what signal is being watched at each location.

• Use a Telnet client to access any receiver on the VLAN or network.

• Customizable EDID table on local unit.

• HDCP compliant.

• Local and remote units must be in the same LAN. The units do not support WAN connections.

连接示意图

HDMI Over Gigabit IP Extender via CAT5e/6/7

Matrix Software for HDMI Over Gigabit IP Extender