

产品简介
The XTENDEX® HDMI USB KVM Over IP Extender with Audio, RS232, and IR provides remote KVM (USB keyboard, USB mouse, and HDMI monitor) access to a USB computer up to 330 feet over a Gigabit network using a single CAT5e/6 cable. The extender consists of the ST-IPUSBH-L-1G local unit that connects to a computer and the ST-IPUSBH-R-1G remote unit that connects to an HDMI monitor, 3.5mm stereo audio speakers and microphone, and up to four USB devices (keyboard, mouse, flashdrive, HDD, or touchscreen display).
The local and remote units can be connected together for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.
产品特点
The XTENDEX® HDMI USB KVM Over IP Extender with Audio, RS232, and IR provides remote KVM (USB keyboard, USB mouse, and HDMI monitor) access to a USB computer up to 330 feet over a Gigabit network using a single CAT5e/6 cable. The extender consists of the ST-IPUSBH-L-1G local unit that connects to a computer and the ST-IPUSBH-R-1G remote unit that connects to an HDMI monitor, 3.5mm stereo audio speakers and microphone, and up to four USB devices (keyboard, mouse, flashdrive, HDD, or touchscreen display).
The local and remote units can be connected together for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.
Supports HDTV resolutions to 1080p.
Supports USB 2.0 devices.
Keyboard and mouse are hot-pluggable.
Connect a mouse, keyboard, flashdrive, HDD or touchscreen display.
Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
Built-in default EDID configuration table.
Support for multiple transmitters and receivers requires a managed network switch.
Distance between transmitter and receiver can be up to 660 feet when using a managed network switch (330 feet on each side).
Easily expandable – add receivers as you add control stations.
Identically configure dip switches on a transmitter and multiple receivers to link them together.
Cascade managed network switches to extend the distance between transmitter and receiver.
Up to 16 transmitters can be connected per individual network switch or between cascaded network switches.
When using multiple remote units, only one unit can have USB control over the source at any time.
Analog audio signals are transmitted via USB - a deactivated remote unit will continue to display video but does not provide analog sound or user control.
HDMI digital audio will still pass through as it is embedded in the video signal.
Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control system hardware such as Control4 or Crestron) to control devices attached to the extender using RS232.
Inexpensive CAT5e/6 cable replaces bulk video cables.
HDCP compliant.
Supports the DDC2B protocol.
Compliant with the HDMI v1.2 standard.
连接示意图

NTI 型号
| 延长功能 |
ST-IPUSBH-L-1G | Local |
ST-IPUSBH-R-1G | Remote |